Exhaust gas recirculation valves were introduced in the car market as a way to reduce gas emissions. Manufacturers created a way to recirculate already burned exhaust gases over to intake manifold in order to be re-burned and this way lowering their emissions. This is basically the function of a EGR valve. The main problem of this concept is that this exhaust gases bring a lot of engine oils and fumes, that after some time tend to block the intake manifold lowering its efficiency dramatically.Electronics Trucks Automotive Software’s EGR Removal Module allows the tuner to close the EGR valve all the time, avoiding the build up of dirt in intake manifold and all troubles associated with it.
EGR Off Steyr Bosch MD1CE101 Electronics Trucks Automotive Software
The Electronics Trucks Automotive software is designed to remove the EGR valve from the ecu Bosch MD1CE101 engine control units of Steyr .
The Electronics Trucks supports all Steyr The module the firmware of the without recalculating the checksum. After writing the modified firmware to the ECU, the connector from the EGR valve can be removed or removed altogether, while physically drowning out the air flow
Electronics Trucks download
Steyr EGR Off Bosch MD1CE101 Electronics Trucks Automotive Software
The Electronics Trucks Automotive software not covered only (Bosch MD1CE101) EGR OFF but covered all Steyr
Covered liste ecu EGR Remover Steyr
- EGR OFF (Remover) Bosch EDC17CV41
- EGR OFF (Remover) Bosch MD1CS069
List Steyr Bosch MD1CE101
The ECU is present or spread in Steyr of various types. We show you in the list below the list of cars that contain the same ECU
- Steyr Absolut 6200 CVT 6.7L 162kW/217HP ECU Bosch MD1CE101
- Steyr Expert 4100 4.5L 81kW/108HP ECU Bosch MD1CE101
- Steyr Expert 4110 4.5L 88kW/118HP ECU Bosch MD1CE101
- Steyr Expert 4130 4.5L 103kW/138HP ECU Bosch MD1CE101
- Steyr Impuls 6145 CVT 6.7L 114kW/153HP ECU Bosch MD1CE101
- Steyr Impuls 6150 CVT 6.7L 121kW/162HP ECU Bosch MD1CE101
- Steyr Impuls 6175 CVT 6.7L 132kW/177HP ECU Bosch MD1CE101
Electronics Trucks is an automotive reprogramming assistance software, developed by a team of engineers, developers and enthusiasts, offering solutions that follow the constant evolution of manufacturer ecu ( Bosch, Delphi , Delphi, Temic, Lucas, Visteon, Motorola, TRW ,Continental ).
hus allowing you to save time thanks to these different options (ADBLUE, EGR, DPF, VOLET, IMMO, DTC, etc.) Read More
